Skip to main content

Qualified Technical Person Course (QTP)

Course fee

$50 (Eligible student) 

$1,660 - (Full Fee - No CSQ funding)

*Fee for Service students will be charged $1,500 at point of enrolment, and the remainder must be paid before the course ends.

CSQ Provider

CSQ Funding:

Student fees are broken down as the following for CSQ funded students:

Unit Fee for service price CSQ funding CSQ funded student pays
UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations $390 $390 $0
UEEEL0030 Conduct compliance inspection of single phase LV electrical installations $500 $500 $0
UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase $440 $440 $0
       
Admin fee (not covered by CSQ) $50 $0 $50
Total $1,380 $0 $1380

All CSQ evidence must be received no later than 12pm the business day before course commencement to access CSQ funding. If your course starts on a Monday this must be provided the Friday before your course commencement date.

⚠️ Please note: If funding eligibility cannot be confirmed, the full course fee will apply.

To enrol: 

•Please fill out all details and submit with your enrolment form:Enrolment Form

Terms and conditions apply for eligible applicants.

Please go to www.csq.org.au for more information.

**Please note: If you do not attend training on the day and have not notified Electro Group Training of your absence prior, you will forfeit your full fee. Admin Fees are non-refundable

^ Please be aware the course dates are subject to minimum numbers, in the event Electro Group Training reschedules you will be moved to the next class free of charge. 

 

Course details

Audience
Duration

3 days on campus training and up to approximately 18 hours of pre-work to complete online before course commencement. Please see below unit list for more details.

 

About this course

Queensland Electrical Contractors Licence – Qualified Technical Person (QTP)

Qualified Technical Person (QTP)

For an unrestricted electrical contractor licence, a QTP must hold a current Queensland electrical work licence and must generally have held a Queensland electrical mechanic work licence for at least two years.

The ESO currently requires the following units:

  • UEEEL0002 – Apply currency of safe working practices and compliance verification of electrical installations

  • UEEEL0030 – Conduct compliance inspection of single-phase LV electrical installations

  • UEEEL0029 – Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

UEEEL0002 must have been completed within the three years preceding the QTP nomination.

The ESO currently advises that it will continue to accept the superseded units UEENEEG197A, UEENEEG122A and UEENEEG123A until further notice. Where UEENEEG197A is relied upon, it must have been completed within three years of the QTP nomination.

Check your individual licensing requirements

Completing training with Electro Group Training does not by itself guarantee that you will be eligible for an Electrical Contractor Licence.

Electrical contractor licensing is administered by the Queensland Electrical Safety Office. Licensing requirements can depend on your existing licence, qualifications, experience and individual circumstances.

Before enrolling, we recommend that you confirm the requirements that apply to you directly with the Electrical Safety Office.

CSQ funding

Construction Skills Queensland (CSQ) funding may be available to eligible participants for eligible training.

CSQ funding is a contribution towards the cost of training and is subject to eligibility requirements, available funding and the applicable CSQ program requirements.

Electro Group Training must assess your eligibility before CSQ funding can be approved. You will be required to provide evidence demonstrating that you meet the applicable CSQ eligibility requirements.

Eligibility for CSQ funding is not determined solely by your occupation or by holding an electrical licence. Your employment and work activities must meet the applicable CSQ eligibility requirements.

Before you enrol, Electro Group Training will advise you of:

  • whether you have been assessed as eligible for CSQ funding;

  • the applicable CSQ funding contribution;

  • any student contribution or other fees you are required to pay; and

  • the total cost of the training where applicable.

If you are not eligible for CSQ funding, you may still undertake the training on a fee-for-service basis.

Resources required for training

Students must have access to digital copies of the required legislation, standards, codes of practice and course resources relevant to the units being undertaken.

Required resources may include:

  • completed assessment assignments for each applicable unit in Microsoft Word format

  • Electrical Safety Act 2002

  • Electrical Safety Regulation 2026

  • Electrical Safety Code of Practice 2021 – Managing electrical risks in the workplace

  • Electrical Safety Code of Practice 2020 – Works

  • AS/NZS 3000:2018 – Electrical installations (Wiring Rules), including applicable amendments

  • AS/NZS 3012:2019 – Electrical installations – Construction and demolition sites, including applicable amendments

  • AS/NZS 3017:2022 – Electrical installations – Verification guidelines

  • AS/NZS 4836:2023 – Safe working on or near low-voltage electrical installations and equipment

  • How to manage work health and safety risks Code of Practice 2021, as currently amended

  • Laptop (a must)

  • Insulation Resistance Tester

  • Multi Meter

Students are responsible for ensuring they have lawful access to any Australian Standards required for the course.

Electro Group Training will advise you before training if additional or updated resources are required.

 

Prerequisites

You must provide evidence you hold a nationally recognised unrestricted Electrical Licence to enrol in this course 

Prerequisite unit
You must hold UEECD0007 Apply work health and safety regulations, codes and practices in the workplace before you start. We also accept the superseded equivalent unit, UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace.

If you can't provide a statement of attainment or record of results for either unit, you will need to complete UEECD0007 as part of your contractors course.

This unit is required because:

  • it is a listed prerequisite for UEEEL0002 Apply currency of safe working practices and compliance verification of electrical installations, UEEEL0029 Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase, and UEEEL0030 Conduct compliance inspection of single phase LV electrical installations
  • the Electrical Safety Office requires it for anyone applying to be the Qualified Business Person (QBP) on a Queensland electrical contractor licence.

UEEEL0002 has a significant amount of verification testing involved and it is recommended you complete the Testing & Fault Finding Refresher Course prior to this unit.

Delivery mode

Blended

Assessment

UEEEL0029:  Assignment

UEEEL0030:  Assignment

Outcome / Licensing

This course provides the requirements for people who are applying for an electrical contractor’s licence from the Electrical Safety Office (ESO) to become a Qualified Technical Person (QTP).

Recognition of Prior Learning (RPL)

RPL is an assessment process. It is not an automatic credit or exemption from training.

To be granted RPL, you must provide sufficient, current, valid and authentic evidence demonstrating that you meet all requirements of the relevant unit of competency.

Evidence may include:

  • current or previous qualifications and statements of attainment

  • licences or other industry credentials

  • employment records

  • workplace documents

  • third-party reports

  • evidence of recent and relevant work activities

  • practical demonstrations or competency conversations where required.

Additional evidence or assessment may be required if the evidence provided does not fully demonstrate competency.

RPL applications are assessed individually. Fees may apply for the RPL assessment process.

If you believe you may be eligible for RPL, please contact Electro Group Training before enrolling so we can discuss the evidence requirements and available assessment option.

Credit Transfer

Credit transfer may be available where you have previously completed the same unit of competency, or a unit that is formally recognised as equivalent.

To apply for credit transfer, you will need to provide an authenticated AQF certification document, such as a Statement of Attainment or qualification transcript, issued by a Registered Training Organisation.

Credit transfer can only be granted where the previous unit meets the applicable equivalency requirements.

Important information about UEEEL0002

For participants seeking to meet the Queensland Electrical Safety Office requirements for nomination as a Qualified Technical Person (QTP), special currency requirements apply to:

UEEEL0002 – Apply currency of safe working practices and compliance verification of electrical installations

The Electrical Safety Office requires UEEEL0002 to have been completed within the previous three years when a person is nominated as a QTP for an unrestricted Queensland electrical contractor licence.

This means that even if you have previously completed UEEEL0002, you may need to complete the unit again if your previous completion date is more than three years old and you require it for QTP licensing purposes.

The superseded unit UEENEEG197A is currently accepted by the Electrical Safety Office; however, it must also have been completed within three years of the QTP nomination date.

Before enrolling, Electro Group Training will review your previous training records and advise whether credit transfer can be applied and whether your previous completion meets the current Electrical Safety Office currency requirements.

Unique Student Identifier (USI)

You must have a Unique Student Identifier (USI) to enrol in nationally recognised training. Create or find your USI at usi.gov.au.

Student Support

Support is available, including language, literacy and numeracy assistance and reasonable adjustment. See Student Support or contact EGT Administration before you enrol.

Units in this course

Course dates

Course calendar